Table 5 Inulin powder average equivalent diameter and maximal and minimal diameters obtained at different Runs
From: Optimization of inulin production process parameters using response surface methodology
Run | Diameter Avg (nm) | Diameter max (nm) | Diameter min (nm) |
|---|---|---|---|
1 | 345.8 ± 32 | 766.5 ± 42 | 42.5 ± 0.5 |
2 | 452.6 ± 22 | 725.6 ± 54 | 38.3 ± 0.5 |
3 | 458.5 ± 30 | 765.2 ± 60 | 35.6 ± 0.8 |
4 | 366.2 ± 26 | 802.8 ± 75 | 40.2 ± 1.0 |
5 | 389.4 ± 18 | 785.6 ± 66 | 33.5 ± 0.7 |
6 | 335.8 ± 25 | 792.5 ± 58 | 48.6 ± 2.0 |
7 | 310.6 ± 34 | 822.4 ± 64 | 30.2 ± 0.6 |
8 | 454.3 ± 20 | 775.3 ± 52 | 45.5 ± 0.5 |
9 | 502.7 ± 44 | 820.6 ± 58 | 48.8 ± 0.5 |
10 | 485.5 ± 38 | 832.5 ± 55 | 36.4 ± 1.0 |
11 | 382.2 ± 36 | 750.4 ± 63 | 46.3 ± 1.0 |
12 | 335.8 ± 28 | 796.5 ± 68 | 55.3 ± 0.4 |
13 | 436.5 ± 33 | 836.7 ± 63 | 50.1 ± 2.0 |
14 | 442.6 ± 27 | 828.6 ± 53 | 52.5 ± 3.0 |
15 | 465.4 ± 35 | 840.8 ± 68 | 55.8 ± 2.0 |
16 | 422.6 ± 42 | 862.4 ± 80 | 48.6 ± 0.8 |
17 | 368.3 ± 34 | 874.8 ± 75 | 56.5 ± 1.0 |